Changed assignment of pickup delays in such a way that they may not be larger than the value actually stored inside the NBT format that is Short.MAX_VALUE. Did not change method signature in order not to produce any shortening cast warnings in existing code. All values larger than 32767 are generally used to indicate that an item should never be picked up. Shortening this to 32767 will actually cause the pickup delay to never decrease, thus resulting in non-pickupable item stacks.
More APIs to follow pending feedback of whether this is the preferred implementation. Methods marked as deprecated and subject to change, but work as is.
Confirmed fix for itemframes not showing up. Based on the code in
CraftPainting.
Besids this fix we now pass null itemstacks directly to the
EntityItemFrame to allow the removal of items in ItemFrames.
If the server crashes during chunk generation then the chunk would have never
been added to the executor, this caused a second exception to be thrown when
the server shutdown from the first exception
Adds an check for existing entities before selecting the location allowing
for hanging entities to be spawned in blocks where there already is an
hanging entity at the default rotation.
Fixes the CraftHanging setRotation function to use the new 1.8 logic.
Related to SPIGOT-206.
Currently HangingEntities should be located next to the block they are
hanging on. With the direction set to the opposite of the block they
are hanging from.
This code is modified to find the correct direction.
calling CraftWorld.save() currently does not call WorldSaveEvent, and WorldSaveEvent could fire on worlds that have saving disabled.
New location will always fire during a world save and only during an actual save.
* commit '7371301edb1c44ab9153e1fba3722ba2f4e3c411':
Forgot that i work in Bukkit... Screw sun conventions
Implementation for the new rotation values. Fixes SPIGOT-93
Up until Minecraft version 1.5 it was not possible to teleport entities
within vehicles. With the 1.5 update came the change in the Minecraft
teleportation logic to dismount before teleporting the entity, if
applicable.
This commit ammends the existing CraftBukkit logic for rejecting
teleportation for entities in vehicles to permit the action. Due to this
change, CraftBukkit is now in-line with Minecraft 1.5 teleportation logic.
When a player dies their inventory is normally scattered over the the area
in which they died. Plugins should be able to modify this behaviour by
defining whether or not the player's inventory will be dropped on the ground or waiting for the player when they eventually respawn.
This commit implements the methods included in the Bukkit half for the new
behaviour by acting upon the boolean flag. The boolean flag is tested
prior to clearing the inventory as well as prior to dropping the items on
the ground. If the flag is true (indicating "keep inventory"), the items
are not removed from the player's inventory and are not dropped on the
ground.
When using a "vanilla" Minecraft server using the "pick block" key on a
command block yields the invoker with a command block within their
inventory while in creative mode. Implications of the invalid items set
containing the command block also include having a "ghost" item that
cannot be placed due to it not actually existing.
This commit resolves the problem and brings Craftbukkit closer to vanilla
behaviour by removing the command block item ID, 137, from the invalid
items set.
Prior to this commit cancelling the PlayerFishEvent would cause various
states of the fishing routine to be incorrectly or wrongly fired. This
incorrect behaviour was due to the miscommunication between the server and
client regarding the fishing state. When the event was cancelled, the
bobber entity was removed and caused the client to incorrectly determine
what the "next state" was to logically be.
This commit resolves the issue by ensuring the client is made aware of the
correct changes at the correct time regarding the bobber entity, therefore
keeping the logical steps of "fishing" proper and in-tact.
Up until this commit the PlayerDropItemEvent, if cancelled, would return
items to the first available slot in the inventory - which is clearly
undesirable as a player and plugin author to deal with.
This commit changes that by ensuring that the item is returned to where
it came from in the player's inventory. This still supports modifying the
drop from the player and will default to "first available slot" if the
item has changed since the event was fired. Other remaining behaviour of
the event is still in tact and has not been modified.
This change improves the quality of life for plugin developers using
iterator iteration with side-effects. In the specified Guava patch, the
internal iterator no longer relies on the AbstractList iterator which
iterates by index, and will instead wrap the provided iterator in a
transformer given the Function.
Many chunk sections contain parts of their data that are the same for
every block they contain. In these cases we can save memory by saving
a single value instead of an array of 4096 copies of that value. Block light
and block data are most likely to be uniform followed closely by sky light
data. Block ids are far less likely to be uniform but give the largest
saving when they are. Because of this we use a compact format for every
part of the chunk. Memory saved from this technique will vary based on the
world but seems to be about 50% on normal Minecraft generated chunks.
This commit centralizes event handling to where damage is actually applied
to the entity to avoid bugs that have resulted from nodamageticks,
modifications to damage after the event has been called, and similar
mishaps. This also implements new API for getting and setting of
modifications made to the damage amount actually applied to the entity.
This is done by storing the change in the damage amount as each modifier
is applied by vanilla code.
The method that actually damages the armor worn by an entity has been
relocated beneath the event called as to not apply durability loss when
the event has been cancelled.
When a chunk is loaded the server tries to ensure it has its initial light
calculations done before sending it to the player. When ticking entities
the server tries to ensure the entity does not walk into an unloaded chunk.
To accomplish these the server checks a one chunk radius around the chunk
to be lit or a two chunk radius around the chunk the entity is in. These
lookups happen every tick even though their result is unlikely to change
that often. To reduce the cost of these checks we replace them with a
system to keep track of what neighbor chunks a chunk has loaded and update
it when chunks load or unload which is a much less frequent action. On a
server with ten players this change removes about 100,000 calls a tick to
LongObjectHashMap's containsKey method.
In commits 71a238ee and c8591397 we added checks while ticking to ensure
we never ticked anything in a chunk meant to be unloaded. We did this to
prevent these chunks being removed from the unload queue and leaked.
However, this causes a ridiculously large number of lookups on the queue
for a somewhat rare occurance. We also now have the chunk GC which will
take care of these leaked chunks when they do happen. With this in mind
we now remove these checks which removes almost all uses of the
LongHashSet backing the unload queue.
After the changes in d611cff2 we started including a mob's equipment when
calling EntityDeathEvent so plugins can access this data. However, the
changes to enable this triggered a bug that makes skeletons and pig zombies
no longer drop equipment because they handle this differently than the rest.
On top of this we don't handle dropping equipment for mobs that cannot
pick up items in vanilla even though vanilla does drop equipment for them
if you summon them with it. We also do not include a horse's inventory
in the event so they drop their saddle, armor, chest, and chest contents
with no way for a plugin to control this.
To solve this issues we revert mob item dropping back to vanilla logic
and instead just capture all their drops in the method they all call to
spawn them into the world. We also move horse inventory dropping so it
happens at a time when we're capturing these drops. With these changes
all items mobs drop on death should now be included in the event and
we have less diff to worry about for future updates.
Waiting to log until after PlayerCommandPreprocessEvent makes the server
not log anything if the event is cancelled. It also makes the server log
what a plugin changed the command to instead of what the player actually
tried to run. As the point of the log is to have a record of every command
a player attempts to run these are both not desirable.
In 7e37cf96 we modified the container logic to handle custom max stack
sizes better and ensure the client stays in sync with this scenario. This
had the effect of sending an extra set slot packet for every inventory
click a player did which was not wanted. These extra packets also cause the
client to recalculate recipes which breaks the result slot for custom
recipes. To avoid the extra packets in general we now only send them if the
max stack is not the one we started with. In the case of a setting a custom
max stack size on a workbench this is still not enough so we also now send
another extra packet to make sure the result slot is always correct.
To handle changes in 1.7.9 we changed skull meta to use GameProfile
instances instead of strings of player names. This reflects what vanilla is
actually storing for skulls now. As skulls still require a name our API was
not changed and we instead look up the rest of the profile information from
the name. The way this was implemented made it so that deserializing a skull
or setting its name potentially involved a network request. As skull meta
itself does not actually require a complete profile we now simply create one
that only contains a name and leave populating it to the server when it is
actually needed.
With the current API it is possible to create an inventory with a specific
type, but it is not possible to give such an inventory a title other than
the default.
The commit changes that by adding a method to optionally supply the title
for the given inventory type and holder, creating the functionality to
display any supported inventory type with a 32 character length String.
If the inventory title supplied is larger than 32 characters then an
IllegalArgumentException is thrown stating so.
In commit 6efeddfe57, TALL_REDWOOD was used instead of the proper TreeType
of MEGA_REDWOOD. Additionally, this fixes an issue in CraftWorld with an
improper boolean flag related to the generation of MEGA_REDWOOD trees.
23 classes have been removed as they are no longer needed using the new
capture logic. This should help quite a bit with future MC updates.
BlockPlaceEvent Refactor
Before calling Item.interactWith, a recording flag is turned on for
setTypeAndData to capture a blockstate for each block that attempts to be set.
When a block place event is cancelled, the recorded blockstate, stack
size, and metadata will revert back to the captured state. If the event is
not cancelled, a notification will be sent to clients and block physics
will be updated.
BlockChangeDelegate Refactor
Now that we have the ability to capture blockstates through world, there
is no need to modify world gen classes with BlockChangeDelegate. Instead
we will simply capture blocks during world generation in order to "replay"
all of the captured blockstates to send back to delegates.
StructureGrowDelegate and BlockSapling.TreeGenerator have also been
removed as part of this change. BlockSapling and BlockMushroom will
capture blockstates the same as block placement and revert back any grow
events if needed.
After the changes in c549609d anvils started incorrectly limiting their
inputs to single item stacks. Vanilla allows for full size stacks here and
this is useful for using materials to repair items so now we do too.
Make sure we check the inventory's max stack size where appropriate and
don't assume the inventory slot is able to take our entire stack just
because it is empty. We also ensure the client is updated with the correct
slot contents and cursor contents in cases where the max stack changes
result in different behavior than the client expected.
