diff --git a/build.xml b/build.xml
deleted file mode 100644
index 8da8dbd22..000000000
--- a/build.xml
+++ /dev/null
@@ -1,74 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!-- You may freely edit this file. See commented blocks below for -->
-<!-- some examples of how to customize the build. -->
-<!-- (If you delete it and reopen the project it will be recreated.) -->
-<!-- By default, only the Clean and Build commands use this build script. -->
-<!-- Commands such as Run, Debug, and Test only use this build script if -->
-<!-- the Compile on Save feature is turned off for the project. -->
-<!-- You can turn off the Compile on Save (or Deploy on Save) setting -->
-<!-- in the project's Project Properties dialog box.-->
-<project name="WorldEdit" default="default" basedir=".">
-    <description>Builds, tests, and runs the project WorldEdit.</description>
-    <import file="nbproject/build-impl.xml"/>
-    <!--
-
-    There exist several targets which are by default empty and which can be 
-    used for execution of your tasks. These targets are usually executed 
-    before and after some main targets. They are: 
-
-      -pre-init:                 called before initialization of project properties
-      -post-init:                called after initialization of project properties
-      -pre-compile:              called before javac compilation
-      -post-compile:             called after javac compilation
-      -pre-compile-single:       called before javac compilation of single file
-      -post-compile-single:      called after javac compilation of single file
-      -pre-compile-test:         called before javac compilation of JUnit tests
-      -post-compile-test:        called after javac compilation of JUnit tests
-      -pre-compile-test-single:  called before javac compilation of single JUnit test
-      -post-compile-test-single: called after javac compilation of single JUunit test
-      -pre-jar:                  called before JAR building
-      -post-jar:                 called after JAR building
-      -post-clean:               called after cleaning build products
-
-    (Targets beginning with '-' are not intended to be called on their own.)
-
-    Example of inserting an obfuscator after compilation could look like this:
-
-        <target name="-post-compile">
-            <obfuscate>
-                <fileset dir="${build.classes.dir}"/>
-            </obfuscate>
-        </target>
-
-    For list of available properties check the imported 
-    nbproject/build-impl.xml file. 
-
-
-    Another way to customize the build is by overriding existing main targets.
-    The targets of interest are: 
-
-      -init-macrodef-javac:     defines macro for javac compilation
-      -init-macrodef-junit:     defines macro for junit execution
-      -init-macrodef-debug:     defines macro for class debugging
-      -init-macrodef-java:      defines macro for class execution
-      -do-jar-with-manifest:    JAR building (if you are using a manifest)
-      -do-jar-without-manifest: JAR building (if you are not using a manifest)
-      run:                      execution of project 
-      -javadoc-build:           Javadoc generation
-      test-report:              JUnit report generation
-
-    An example of overriding the target for project execution could look like this:
-
-        <target name="run" depends="WorldEdit-impl.jar">
-            <exec dir="bin" executable="launcher.exe">
-                <arg file="${dist.jar}"/>
-            </exec>
-        </target>
-
-    Notice that the overridden target depends on the jar target and not only on 
-    the compile target as the regular run target does. Again, for a list of available 
-    properties which you can use, check the target you are overriding in the
-    nbproject/build-impl.xml file. 
-
-    -->
-</project>
diff --git a/nbproject/build-impl.xml b/nbproject/build-impl.xml
deleted file mode 100644
index db968003c..000000000
--- a/nbproject/build-impl.xml
+++ /dev/null
@@ -1,891 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!--
-*** GENERATED FROM project.xml - DO NOT EDIT  ***
-***         EDIT ../build.xml INSTEAD         ***
-
-For the purpose of easier reading the script
-is divided into following sections:
-
-  - initialization
-  - compilation
-  - jar
-  - execution
-  - debugging
-  - javadoc
-  - junit compilation
-  - junit execution
-  - junit debugging
-  - applet
-  - cleanup
-
-        -->
-<project xmlns:j2seproject1="http://www.netbeans.org/ns/j2se-project/1" xmlns:j2seproject3="http://www.netbeans.org/ns/j2se-project/3" xmlns:jaxrpc="http://www.netbeans.org/ns/j2se-project/jax-rpc" basedir=".." default="default" name="WorldEdit-impl">
-    <fail message="Please build using Ant 1.7.1 or higher.">
-        <condition>
-            <not>
-                <antversion atleast="1.7.1"/>
-            </not>
-        </condition>
-    </fail>
-    <target depends="test,jar,javadoc" description="Build and test whole project." name="default"/>
-    <!-- 
-                ======================
-                INITIALIZATION SECTION 
-                ======================
-            -->
-    <target name="-pre-init">
-        <!-- Empty placeholder for easier customization. -->
-        <!-- You can override this target in the ../build.xml file. -->
-    </target>
-    <target depends="-pre-init" name="-init-private">
-        <property file="nbproject/private/config.properties"/>
-        <property file="nbproject/private/configs/${config}.properties"/>
-        <property file="nbproject/private/private.properties"/>
-    </target>
-    <target depends="-pre-init,-init-private" name="-init-user">
-        <property file="${user.properties.file}"/>
-        <!-- The two properties below are usually overridden -->
-        <!-- by the active platform. Just a fallback. -->
-        <property name="default.javac.source" value="1.4"/>
-        <property name="default.javac.target" value="1.4"/>
-    </target>
-    <target depends="-pre-init,-init-private,-init-user" name="-init-project">
-        <property file="nbproject/configs/${config}.properties"/>
-        <property file="nbproject/project.properties"/>
-    </target>
-    <target depends="-pre-init,-init-private,-init-user,-init-project,-init-macrodef-property" name="-do-init">
-        <available file="${manifest.file}" property="manifest.available"/>
-        <available file="${application.splash}" property="splashscreen.available"/>
-        <condition property="main.class.available">
-            <and>
-                <isset property="main.class"/>
-                <not>
-                    <equals arg1="${main.class}" arg2="" trim="true"/>
-                </not>
-            </and>
-        </condition>
-        <condition property="manifest.available+main.class">
-            <and>
-                <isset property="manifest.available"/>
-                <isset property="main.class.available"/>
-            </and>
-        </condition>
-        <condition property="do.mkdist">
-            <and>
-                <isset property="libs.CopyLibs.classpath"/>
-                <not>
-                    <istrue value="${mkdist.disabled}"/>
-                </not>
-            </and>
-        </condition>
-        <condition property="manifest.available+main.class+mkdist.available">
-            <and>
-                <istrue value="${manifest.available+main.class}"/>
-                <isset property="do.mkdist"/>
-            </and>
-        </condition>
-        <condition property="manifest.available+main.class+mkdist.available+splashscreen.available">
-            <and>
-                <istrue value="${manifest.available+main.class+mkdist.available}"/>
-                <istrue value="${splashscreen.available}"/>
-            </and>
-        </condition>
-        <condition property="do.archive">
-            <not>
-                <istrue value="${jar.archive.disabled}"/>
-            </not>
-        </condition>
-        <condition property="do.archive+manifest.available">
-            <and>
-                <isset property="manifest.available"/>
-                <istrue value="${do.archive}"/>
-            </and>
-        </condition>
-        <condition property="do.archive+manifest.available+main.class">
-            <and>
-                <istrue value="${manifest.available+main.class}"/>
-                <istrue value="${do.archive}"/>
-            </and>
-        </condition>
-        <condition property="do.archive+manifest.available+main.class+mkdist.available">
-            <and>
-                <istrue value="${manifest.available+main.class+mkdist.available}"/>
-                <istrue value="${do.archive}"/>
-            </and>
-        </condition>
-        <condition property="do.archive+manifest.available+main.class+mkdist.available+splashscreen.available">
-            <and>
-                <istrue value="${manifest.available+main.class+mkdist.available+splashscreen.available}"/>
-                <istrue value="${do.archive}"/>
-            </and>
-        </condition>
-        <condition property="have.tests">
-            <or>
-                <available file="${test.src.dir}"/>
-            </or>
-        </condition>
-        <condition property="have.sources">
-            <or>
-                <available file="${src.dir}"/>
-            </or>
-        </condition>
-        <condition property="netbeans.home+have.tests">
-            <and>
-                <isset property="netbeans.home"/>
-                <isset property="have.tests"/>
-            </and>
-        </condition>
-        <condition property="no.javadoc.preview">
-            <and>
-                <isset property="javadoc.preview"/>
-                <isfalse value="${javadoc.preview}"/>
-            </and>
-        </condition>
-        <property name="run.jvmargs" value=""/>
-        <property name="javac.compilerargs" value=""/>
-        <property name="work.dir" value="${basedir}"/>
-        <condition property="no.deps">
-            <and>
-                <istrue value="${no.dependencies}"/>
-            </and>
-        </condition>
-        <property name="javac.debug" value="true"/>
-        <property name="javadoc.preview" value="true"/>
-        <property name="application.args" value=""/>
-        <property name="source.encoding" value="${file.encoding}"/>
-        <property name="runtime.encoding" value="${source.encoding}"/>
-        <condition property="javadoc.encoding.used" value="${javadoc.encoding}">
-            <and>
-                <isset property="javadoc.encoding"/>
-                <not>
-                    <equals arg1="${javadoc.encoding}" arg2=""/>
-                </not>
-            </and>
-        </condition>
-        <property name="javadoc.encoding.used" value="${source.encoding}"/>
-        <property name="includes" value="**"/>
-        <property name="excludes" value=""/>
-        <property name="do.depend" value="false"/>
-        <condition property="do.depend.true">
-            <istrue value="${do.depend}"/>
-        </condition>
-        <path id="endorsed.classpath.path" path="${endorsed.classpath}"/>
-        <condition else="" property="endorsed.classpath.cmd.line.arg" value="-Xbootclasspath/p:'${toString:endorsed.classpath.path}'">
-            <length length="0" string="${endorsed.classpath}" when="greater"/>
-        </condition>
-        <property name="javac.fork" value="false"/>
-        <property name="jar.index" value="false"/>
-        <available file="${meta.inf.dir}/persistence.xml" property="has.persistence.xml"/>
-    </target>
-    <target name="-post-init">
-        <!-- Empty placeholder for easier customization. -->
-        <!-- You can override this target in the ../build.xml file. -->
-    </target>
-    <target depends="-pre-init,-init-private,-init-user,-init-project,-do-init" name="-init-check">
-        <fail unless="src.dir">Must set src.dir</fail>
-        <fail unless="test.src.dir">Must set test.src.dir</fail>
-        <fail unless="build.dir">Must set build.dir</fail>
-        <fail unless="dist.dir">Must set dist.dir</fail>
-        <fail unless="build.classes.dir">Must set build.classes.dir</fail>
-        <fail unless="dist.javadoc.dir">Must set dist.javadoc.dir</fail>
-        <fail unless="build.test.classes.dir">Must set build.test.classes.dir</fail>
-        <fail unless="build.test.results.dir">Must set build.test.results.dir</fail>
-        <fail unless="build.classes.excludes">Must set build.classes.excludes</fail>
-        <fail unless="dist.jar">Must set dist.jar</fail>
-    </target>
-    <target name="-init-macrodef-property">
-        <macrodef name="property" uri="http://www.netbeans.org/ns/j2se-project/1">
-            <attribute name="name"/>
-            <attribute name="value"/>
-            <sequential>
-                <property name="@{name}" value="${@{value}}"/>
-            </sequential>
-        </macrodef>
-    </target>
-    <target depends="-init-ap-cmdline-properties" if="ap.supported.internal" name="-init-macrodef-javac-with-processors">
-        <macrodef name="javac" uri="http://www.netbeans.org/ns/j2se-project/3">
-            <attribute default="${src.dir}" name="srcdir"/>
-            <attribute default="${build.classes.dir}" name="destdir"/>
-            <attribute default="${javac.classpath}" name="classpath"/>
-            <attribute default="${javac.processorpath}" name="processorpath"/>
-            <attribute default="${build.generated.sources.dir}/ap-source-output" name="apgeneratedsrcdir"/>
-            <attribute default="${includes}" name="includes"/>
-            <attribute default="${excludes}" name="excludes"/>
-            <attribute default="${javac.debug}" name="debug"/>
-            <attribute default="${empty.dir}" name="sourcepath"/>
-            <attribute default="${empty.dir}" name="gensrcdir"/>
-            <element name="customize" optional="true"/>
-            <sequential>
-                <property location="${build.dir}/empty" name="empty.dir"/>
-                <mkdir dir="${empty.dir}"/>
-                <mkdir dir="@{apgeneratedsrcdir}"/>
-                <javac debug="@{debug}" deprecation="${javac.deprecation}" destdir="@{destdir}" encoding="${source.encoding}" excludes="@{excludes}" fork="${javac.fork}" includeantruntime="false" includes="@{includes}" source="${javac.source}" sourcepath="@{sourcepath}" srcdir="@{srcdir}" target="${javac.target}" tempdir="${java.io.tmpdir}">
-                    <src>
-                        <dirset dir="@{gensrcdir}" erroronmissingdir="false">
-                            <include name="*"/>
-                        </dirset>
-                    </src>
-                    <classpath>
-                        <path path="@{classpath}"/>
-                    </classpath>
-                    <compilerarg line="${endorsed.classpath.cmd.line.arg}"/>
-                    <compilerarg line="${javac.compilerargs}"/>
-                    <compilerarg value="-processorpath"/>
-                    <compilerarg path="@{processorpath}:${empty.dir}"/>
-                    <compilerarg line="${ap.processors.internal}"/>
-                    <compilerarg line="${annotation.processing.processor.options}"/>
-                    <compilerarg value="-s"/>
-                    <compilerarg path="@{apgeneratedsrcdir}"/>
-                    <compilerarg line="${ap.proc.none.internal}"/>
-                    <customize/>
-                </javac>
-            </sequential>
-        </macrodef>
-    </target>
-    <target depends="-init-ap-cmdline-properties" name="-init-macrodef-javac-without-processors" unless="ap.supported.internal">
-        <macrodef name="javac" uri="http://www.netbeans.org/ns/j2se-project/3">
-            <attribute default="${src.dir}" name="srcdir"/>
-            <attribute default="${build.classes.dir}" name="destdir"/>
-            <attribute default="${javac.classpath}" name="classpath"/>
-            <attribute default="${javac.processorpath}" name="processorpath"/>
-            <attribute default="${build.generated.sources.dir}/ap-source-output" name="apgeneratedsrcdir"/>
-            <attribute default="${includes}" name="includes"/>
-            <attribute default="${excludes}" name="excludes"/>
-            <attribute default="${javac.debug}" name="debug"/>
-            <attribute default="${empty.dir}" name="sourcepath"/>
-            <attribute default="${empty.dir}" name="gensrcdir"/>
-            <element name="customize" optional="true"/>
-            <sequential>
-                <property location="${build.dir}/empty" name="empty.dir"/>
-                <mkdir dir="${empty.dir}"/>
-                <javac debug="@{debug}" deprecation="${javac.deprecation}" destdir="@{destdir}" encoding="${source.encoding}" excludes="@{excludes}" fork="${javac.fork}" includeantruntime="false" includes="@{includes}" source="${javac.source}" sourcepath="@{sourcepath}" srcdir="@{srcdir}" target="${javac.target}" tempdir="${java.io.tmpdir}">
-                    <src>
-                        <dirset dir="@{gensrcdir}" erroronmissingdir="false">
-                            <include name="*"/>
-                        </dirset>
-                    </src>
-                    <classpath>
-                        <path path="@{classpath}"/>
-                    </classpath>
-                    <compilerarg line="${endorsed.classpath.cmd.line.arg}"/>
-                    <compilerarg line="${javac.compilerargs}"/>
-                    <customize/>
-                </javac>
-            </sequential>
-        </macrodef>
-    </target>
-    <target depends="-init-macrodef-javac-with-processors,-init-macrodef-javac-without-processors" name="-init-macrodef-javac">
-        <macrodef name="depend" uri="http://www.netbeans.org/ns/j2se-project/3">
-            <attribute default="${src.dir}" name="srcdir"/>
-            <attribute default="${build.classes.dir}" name="destdir"/>
-            <attribute default="${javac.classpath}" name="classpath"/>
-            <sequential>
-                <depend cache="${build.dir}/depcache" destdir="@{destdir}" excludes="${excludes}" includes="${includes}" srcdir="@{srcdir}">
-                    <classpath>
-                        <path path="@{classpath}"/>
-                    </classpath>
-                </depend>
-            </sequential>
-        </macrodef>
-        <macrodef name="force-recompile" uri="http://www.netbeans.org/ns/j2se-project/3">
-            <attribute default="${build.classes.dir}" name="destdir"/>
-            <sequential>
-                <fail unless="javac.includes">Must set javac.includes</fail>
-                <pathconvert pathsep="," property="javac.includes.binary">
-                    <path>
-                        <filelist dir="@{destdir}" files="${javac.includes}"/>
-                    </path>
-                    <globmapper from="*.java" to="*.class"/>
-                </pathconvert>
-                <delete>
-                    <files includes="${javac.includes.binary}"/>
-                </delete>
-            </sequential>
-        </macrodef>
-    </target>
-    <target name="-init-macrodef-junit">
-        <macrodef name="junit" uri="http://www.netbeans.org/ns/j2se-project/3">
-            <attribute default="${includes}" name="includes"/>
-            <attribute default="${excludes}" name="excludes"/>
-            <attribute default="**" name="testincludes"/>
-            <sequential>
-                <junit dir="${work.dir}" errorproperty="tests.failed" failureproperty="tests.failed" fork="true" showoutput="true" tempdir="${build.dir}">
-                    <batchtest todir="${build.test.results.dir}">
-                        <fileset dir="${test.src.dir}" excludes="@{excludes},${excludes}" includes="@{includes}">
-                            <filename name="@{testincludes}"/>
-                        </fileset>
-                    </batchtest>
-                    <classpath>
-                        <path path="${run.test.classpath}"/>
-                    </classpath>
-                    <syspropertyset>
-                        <propertyref prefix="test-sys-prop."/>
-                        <mapper from="test-sys-prop.*" to="*" type="glob"/>
-                    </syspropertyset>
-                    <formatter type="brief" usefile="false"/>
-                    <formatter type="xml"/>
-                    <jvmarg line="${endorsed.classpath.cmd.line.arg}"/>
-                    <jvmarg line="${run.jvmargs}"/>
-                </junit>
-            </sequential>
-        </macrodef>
-    </target>
-    <target depends="-init-debug-args" name="-init-macrodef-nbjpda">
-        <macrodef name="nbjpdastart" uri="http://www.netbeans.org/ns/j2se-project/1">
-            <attribute default="${main.class}" name="name"/>
-            <attribute default="${debug.classpath}" name="classpath"/>
-            <attribute default="" name="stopclassname"/>
-            <sequential>
-                <nbjpdastart addressproperty="jpda.address" name="@{name}" stopclassname="@{stopclassname}" transport="${debug-transport}">
-                    <classpath>
-                        <path path="@{classpath}"/>
-                    </classpath>
-                </nbjpdastart>
-            </sequential>
-        </macrodef>
-        <macrodef name="nbjpdareload" uri="http://www.netbeans.org/ns/j2se-project/1">
-            <attribute default="${build.classes.dir}" name="dir"/>
-            <sequential>
-                <nbjpdareload>
-                    <fileset dir="@{dir}" includes="${fix.classes}">
-                        <include name="${fix.includes}*.class"/>
-                    </fileset>
-                </nbjpdareload>
-            </sequential>
-        </macrodef>
-    </target>
-    <target name="-init-debug-args">
-        <property name="version-output" value="java version &quot;${ant.java.version}"/>
-        <condition property="have-jdk-older-than-1.4">
-            <or>
-                <contains string="${version-output}" substring="java version &quot;1.0"/>
-                <contains string="${version-output}" substring="java version &quot;1.1"/>
-                <contains string="${version-output}" substring="java version &quot;1.2"/>
-                <contains string="${version-output}" substring="java version &quot;1.3"/>
-            </or>
-        </condition>
-        <condition else="-Xdebug" property="debug-args-line" value="-Xdebug -Xnoagent -Djava.compiler=none">
-            <istrue value="${have-jdk-older-than-1.4}"/>
-        </condition>
-        <condition else="dt_socket" property="debug-transport-by-os" value="dt_shmem">
-            <os family="windows"/>
-        </condition>
-        <condition else="${debug-transport-by-os}" property="debug-transport" value="${debug.transport}">
-            <isset property="debug.transport"/>
-        </condition>
-    </target>
-    <target depends="-init-debug-args" name="-init-macrodef-debug">
-        <macrodef name="debug" uri="http://www.netbeans.org/ns/j2se-project/3">
-            <attribute default="${main.class}" name="classname"/>
-            <attribute default="${debug.classpath}" name="classpath"/>
-            <element name="customize" optional="true"/>
-            <sequential>
-                <java classname="@{classname}" dir="${work.dir}" fork="true">
-                    <jvmarg line="${endorsed.classpath.cmd.line.arg}"/>
-                    <jvmarg line="${debug-args-line}"/>
-                    <jvmarg value="-Xrunjdwp:transport=${debug-transport},address=${jpda.address}"/>
-                    <jvmarg value="-Dfile.encoding=${runtime.encoding}"/>
-                    <redirector errorencoding="${runtime.encoding}" inputencoding="${runtime.encoding}" outputencoding="${runtime.encoding}"/>
-                    <jvmarg line="${run.jvmargs}"/>
-                    <classpath>
-                        <path path="@{classpath}"/>
-                    </classpath>
-                    <syspropertyset>
-                        <propertyref prefix="run-sys-prop."/>
-                        <mapper from="run-sys-prop.*" to="*" type="glob"/>
-                    </syspropertyset>
-                    <customize/>
-                </java>
-            </sequential>
-        </macrodef>
-    </target>
-    <target name="-init-macrodef-java">
-        <macrodef name="java" uri="http://www.netbeans.org/ns/j2se-project/1">
-            <attribute default="${main.class}" name="classname"/>
-            <attribute default="${run.classpath}" name="classpath"/>
-            <element name="customize" optional="true"/>
-            <sequential>
-                <java classname="@{classname}" dir="${work.dir}" fork="true">
-                    <jvmarg line="${endorsed.classpath.cmd.line.arg}"/>
-                    <jvmarg value="-Dfile.encoding=${runtime.encoding}"/>
-                    <redirector errorencoding="${runtime.encoding}" inputencoding="${runtime.encoding}" outputencoding="${runtime.encoding}"/>
-                    <jvmarg line="${run.jvmargs}"/>
-                    <classpath>
-                        <path path="@{classpath}"/>
-                    </classpath>
-                    <syspropertyset>
-                        <propertyref prefix="run-sys-prop."/>
-                        <mapper from="run-sys-prop.*" to="*" type="glob"/>
-                    </syspropertyset>
-                    <customize/>
-                </java>
-            </sequential>
-        </macrodef>
-    </target>
-    <target name="-init-macrodef-copylibs">
-        <macrodef name="copylibs" uri="http://www.netbeans.org/ns/j2se-project/3">
-            <element name="customize" optional="true"/>
-            <sequential>
-                <property location="${build.classes.dir}" name="build.classes.dir.resolved"/>
-                <pathconvert property="run.classpath.without.build.classes.dir">
-                    <path path="${run.classpath}"/>
-                    <map from="${build.classes.dir.resolved}" to=""/>
-                </pathconvert>
-                <pathconvert pathsep=" " property="jar.classpath">
-                    <path path="${run.classpath.without.build.classes.dir}"/>
-                    <chainedmapper>
-                        <flattenmapper/>
-                        <globmapper from="*" to="lib/*"/>
-                    </chainedmapper>
-                </pathconvert>
-                <taskdef classname="org.netbeans.modules.java.j2seproject.copylibstask.CopyLibs" classpath="${libs.CopyLibs.classpath}" name="copylibs"/>
-                <copylibs compress="${jar.compress}" index="${jar.index}" jarfile="${dist.jar}" manifest="${manifest.file}" runtimeclasspath="${run.classpath.without.build.classes.dir}">
-                    <fileset dir="${build.classes.dir}"/>
-                    <manifest>
-                        <attribute name="Class-Path" value="${jar.classpath}"/>
-                        <customize/>
-                    </manifest>
-                </copylibs>
-            </sequential>
-        </macrodef>
-    </target>
-    <target name="-init-presetdef-jar">
-        <presetdef name="jar" uri="http://www.netbeans.org/ns/j2se-project/1">
-            <jar compress="${jar.compress}" index="${jar.index}" jarfile="${dist.jar}">
-                <j2seproject1:fileset dir="${build.classes.dir}"/>
-            </jar>
-        </presetdef>
-    </target>
-    <target name="-init-ap-cmdline-properties">
-        <property name="annotation.processing.enabled" value="true"/>
-        <property name="annotation.processing.processors.list" value=""/>
-        <property name="annotation.processing.processor.options" value=""/>
-        <property name="annotation.processing.run.all.processors" value="true"/>
-        <property name="javac.processorpath" value="${javac.classpath}"/>
-        <property name="javac.test.processorpath" value="${javac.test.classpath}"/>
-        <condition property="ap.supported.internal" value="true">
-            <not>
-                <matches pattern="1\.[0-5](\..*)?" string="${javac.source}"/>
-            </not>
-        </condition>
-    </target>
-    <target depends="-init-ap-cmdline-properties" if="ap.supported.internal" name="-init-ap-cmdline-supported">
-        <condition else="" property="ap.processors.internal" value="-processor ${annotation.processing.processors.list}">
-            <isfalse value="${annotation.processing.run.all.processors}"/>
-        </condition>
-        <condition else="" property="ap.proc.none.internal" value="-proc:none">
-            <isfalse value="${annotation.processing.enabled}"/>
-        </condition>
-    </target>
-    <target depends="-init-ap-cmdline-properties,-init-ap-cmdline-supported" name="-init-ap-cmdline">
-        <property name="ap.cmd.line.internal" value=""/>
-    </target>
-    <target depends="-pre-init,-init-private,-init-user,-init-project,-do-init,-post-init,-init-check,-init-macrodef-property,-init-macrodef-javac,-init-macrodef-junit,-init-macrodef-nbjpda,-init-macrodef-debug,-init-macrodef-java,-init-presetdef-jar,-init-ap-cmdline" name="init"/>
-    <!--
-                ===================
-                COMPILATION SECTION
-                ===================
-            -->
-    <target name="-deps-jar-init" unless="built-jar.properties">
-        <property location="${build.dir}/built-jar.properties" name="built-jar.properties"/>
-        <delete file="${built-jar.properties}" quiet="true"/>
-    </target>
-    <target if="already.built.jar.${basedir}" name="-warn-already-built-jar">
-        <echo level="warn" message="Cycle detected: WorldEdit was already built"/>
-    </target>
-    <target depends="init,-deps-jar-init" name="deps-jar" unless="no.deps">
-        <mkdir dir="${build.dir}"/>
-        <touch file="${built-jar.properties}" verbose="false"/>
-        <property file="${built-jar.properties}" prefix="already.built.jar."/>
-        <antcall target="-warn-already-built-jar"/>
-        <propertyfile file="${built-jar.properties}">
-            <entry key="${basedir}" value=""/>
-        </propertyfile>
-    </target>
-    <target depends="init,-check-automatic-build,-clean-after-automatic-build" name="-verify-automatic-build"/>
-    <target depends="init" name="-check-automatic-build">
-        <available file="${build.classes.dir}/.netbeans_automatic_build" property="netbeans.automatic.build"/>
-    </target>
-    <target depends="init" if="netbeans.automatic.build" name="-clean-after-automatic-build">
-        <antcall target="clean"/>
-    </target>
-    <target depends="init,deps-jar" name="-pre-pre-compile">
-        <mkdir dir="${build.classes.dir}"/>
-    </target>
-    <target name="-pre-compile">
-        <!-- Empty placeholder for easier customization. -->
-        <!-- You can override this target in the ../build.xml file. -->
-    </target>
-    <target if="do.depend.true" name="-compile-depend">
-        <pathconvert property="build.generated.subdirs">
-            <dirset dir="${build.generated.sources.dir}" erroronmissingdir="false">
-                <include name="*"/>
-            </dirset>
-        </pathconvert>
-        <j2seproject3:depend srcdir="${src.dir}:${build.generated.subdirs}"/>
-    </target>
-    <target depends="init,deps-jar,-pre-pre-compile,-pre-compile, -copy-persistence-xml,-compile-depend" if="have.sources" name="-do-compile">
-        <j2seproject3:javac gensrcdir="${build.generated.sources.dir}"/>
-        <copy todir="${build.classes.dir}">
-            <fileset dir="${src.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/>
-        </copy>
-    </target>
-    <target if="has.persistence.xml" name="-copy-persistence-xml">
-        <mkdir dir="${build.classes.dir}/META-INF"/>
-        <copy todir="${build.classes.dir}/META-INF">
-            <fileset dir="${meta.inf.dir}" includes="persistence.xml"/>
-        </copy>
-    </target>
-    <target name="-post-compile">
-        <!-- Empty placeholder for easier customization. -->
-        <!-- You can override this target in the ../build.xml file. -->
-    </target>
-    <target depends="init,deps-jar,-verify-automatic-build,-pre-pre-compile,-pre-compile,-do-compile,-post-compile" description="Compile project." name="compile"/>
-    <target name="-pre-compile-single">
-        <!-- Empty placeholder for easier customization. -->
-        <!-- You can override this target in the ../build.xml file. -->
-    </target>
-    <target depends="init,deps-jar,-pre-pre-compile" name="-do-compile-single">
-        <fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>
-        <j2seproject3:force-recompile/>
-        <j2seproject3:javac excludes="" gensrcdir="${build.generated.sources.dir}" includes="${javac.includes}" sourcepath="${src.dir}"/>
-    </target>
-    <target name="-post-compile-single">
-        <!-- Empty placeholder for easier customization. -->
-        <!-- You can override this target in the ../build.xml file. -->
-    </target>
-    <target depends="init,deps-jar,-verify-automatic-build,-pre-pre-compile,-pre-compile-single,-do-compile-single,-post-compile-single" name="compile-single"/>
-    <!--
-                ====================
-                JAR BUILDING SECTION
-                ====================
-            -->
-    <target depends="init" name="-pre-pre-jar">
-        <dirname file="${dist.jar}" property="dist.jar.dir"/>
-        <mkdir dir="${dist.jar.dir}"/>
-    </target>
-    <target name="-pre-jar">
-        <!-- Empty placeholder for easier customization. -->
-        <!-- You can override this target in the ../build.xml file. -->
-    </target>
-    <target depends="init,compile,-pre-pre-jar,-pre-jar" if="do.archive" name="-do-jar-without-manifest" unless="manifest.available">
-        <j2seproject1:jar/>
-    </target>
-    <target depends="init,compile,-pre-pre-jar,-pre-jar" if="do.archive+manifest.available" name="-do-jar-with-manifest" unless="manifest.available+main.class">
-        <j2seproject1:jar manifest="${manifest.file}"/>
-    </target>
-    <target depends="init,compile,-pre-pre-jar,-pre-jar" if="do.archive+manifest.available+main.class" name="-do-jar-with-mainclass" unless="manifest.available+main.class+mkdist.available">
-        <j2seproject1:jar manifest="${manifest.file}">
-            <j2seproject1:manifest>
-                <j2seproject1:attribute name="Main-Class" value="${main.class}"/>
-            </j2seproject1:manifest>
-        </j2seproject1:jar>
-        <echo>To run this application from the command line without Ant, try:</echo>
-        <property location="${build.classes.dir}" name="build.classes.dir.resolved"/>
-        <property location="${dist.jar}" name="dist.jar.resolved"/>
-        <pathconvert property="run.classpath.with.dist.jar">
-            <path path="${run.classpath}"/>
-            <map from="${build.classes.dir.resolved}" to="${dist.jar.resolved}"/>
-        </pathconvert>
-        <echo>java -cp "${run.classpath.with.dist.jar}" ${main.class}</echo>
-    </target>
-    <target depends="init,compile,-pre-pre-jar,-pre-jar,-init-macrodef-copylibs" if="do.archive+manifest.available+main.class+mkdist.available+splashscreen.available" name="-do-jar-with-libraries-and-splashscreen">
-        <basename file="${application.splash}" property="splashscreen.basename"/>
-        <mkdir dir="${build.classes.dir}/META-INF"/>
-        <copy failonerror="false" file="${application.splash}" todir="${build.classes.dir}/META-INF"/>
-        <j2seproject3:copylibs>
-            <customize>
-                <attribute name="Main-Class" value="${main.class}"/>
-                <attribute name="SplashScreen-Image" value="META-INF/${splashscreen.basename}"/>
-            </customize>
-        </j2seproject3:copylibs>
-        <echo>To run this application from the command line without Ant, try:</echo>
-        <property location="${dist.jar}" name="dist.jar.resolved"/>
-        <echo>java -jar "${dist.jar.resolved}"</echo>
-    </target>
-    <target depends="init,compile,-pre-pre-jar,-pre-jar,-init-macrodef-copylibs" if="do.archive+manifest.available+main.class+mkdist.available" name="-do-jar-with-libraries" unless="splashscreen.available">
-        <j2seproject3:copylibs>
-            <customize>
-                <attribute name="Main-Class" value="${main.class}"/>
-            </customize>
-        </j2seproject3:copylibs>
-        <echo>To run this application from the command line without Ant, try:</echo>
-        <property location="${dist.jar}" name="dist.jar.resolved"/>
-        <echo>java -jar "${dist.jar.resolved}"</echo>
-    </target>
-    <target name="-post-jar">
-        <!-- Empty placeholder for easier customization. -->
-        <!-- You can override this target in the ../build.xml file. -->
-    </target>
-    <target depends="init,compile,-pre-jar,-do-jar-with-manifest,-do-jar-without-manifest,-do-jar-with-mainclass,-do-jar-with-libraries-and-splashscreen,-do-jar-with-libraries,-post-jar" description="Build JAR." name="jar"/>
-    <!--
-                =================
-                EXECUTION SECTION
-                =================
-            -->
-    <target depends="init,compile" description="Run a main class." name="run">
-        <j2seproject1:java>
-            <customize>
-                <arg line="${application.args}"/>
-            </customize>
-        </j2seproject1:java>
-    </target>
-    <target name="-do-not-recompile">
-        <property name="javac.includes.binary" value=""/>
-    </target>
-    <target depends="init,compile-single" name="run-single">
-        <fail unless="run.class">Must select one file in the IDE or set run.class</fail>
-        <j2seproject1:java classname="${run.class}"/>
-    </target>
-    <target depends="init,compile-test-single" name="run-test-with-main">
-        <fail unless="run.class">Must select one file in the IDE or set run.class</fail>
-        <j2seproject1:java classname="${run.class}" classpath="${run.test.classpath}"/>
-    </target>
-    <!--
-                =================
-                DEBUGGING SECTION
-                =================
-            -->
-    <target depends="init" if="netbeans.home" name="-debug-start-debugger">
-        <j2seproject1:nbjpdastart name="${debug.class}"/>
-    </target>
-    <target depends="init" if="netbeans.home" name="-debug-start-debugger-main-test">
-        <j2seproject1:nbjpdastart classpath="${debug.test.classpath}" name="${debug.class}"/>
-    </target>
-    <target depends="init,compile" name="-debug-start-debuggee">
-        <j2seproject3:debug>
-            <customize>
-                <arg line="${application.args}"/>
-            </customize>
-        </j2seproject3:debug>
-    </target>
-    <target depends="init,compile,-debug-start-debugger,-debug-start-debuggee" description="Debug project in IDE." if="netbeans.home" name="debug"/>
-    <target depends="init" if="netbeans.home" name="-debug-start-debugger-stepinto">
-        <j2seproject1:nbjpdastart stopclassname="${main.class}"/>
-    </target>
-    <target depends="init,compile,-debug-start-debugger-stepinto,-debug-start-debuggee" if="netbeans.home" name="debug-stepinto"/>
-    <target depends="init,compile-single" if="netbeans.home" name="-debug-start-debuggee-single">
-        <fail unless="debug.class">Must select one file in the IDE or set debug.class</fail>
-        <j2seproject3:debug classname="${debug.class}"/>
-    </target>
-    <target depends="init,compile-single,-debug-start-debugger,-debug-start-debuggee-single" if="netbeans.home" name="debug-single"/>
-    <target depends="init,compile-test-single" if="netbeans.home" name="-debug-start-debuggee-main-test">
-        <fail unless="debug.class">Must select one file in the IDE or set debug.class</fail>
-        <j2seproject3:debug classname="${debug.class}" classpath="${debug.test.classpath}"/>
-    </target>
-    <target depends="init,compile-test-single,-debug-start-debugger-main-test,-debug-start-debuggee-main-test" if="netbeans.home" name="debug-test-with-main"/>
-    <target depends="init" name="-pre-debug-fix">
-        <fail unless="fix.includes">Must set fix.includes</fail>
-        <property name="javac.includes" value="${fix.includes}.java"/>
-    </target>
-    <target depends="init,-pre-debug-fix,compile-single" if="netbeans.home" name="-do-debug-fix">
-        <j2seproject1:nbjpdareload/>
-    </target>
-    <target depends="init,-pre-debug-fix,-do-debug-fix" if="netbeans.home" name="debug-fix"/>
-    <!--
-                ===============
-                JAVADOC SECTION
-                ===============
-            -->
-    <target depends="init" if="have.sources" name="-javadoc-build">
-        <mkdir dir="${dist.javadoc.dir}"/>
-        <javadoc additionalparam="${javadoc.additionalparam}" author="${javadoc.author}" charset="UTF-8" destdir="${dist.javadoc.dir}" docencoding="UTF-8" encoding="${javadoc.encoding.used}" failonerror="true" noindex="${javadoc.noindex}" nonavbar="${javadoc.nonavbar}" notree="${javadoc.notree}" private="${javadoc.private}" source="${javac.source}" splitindex="${javadoc.splitindex}" use="${javadoc.use}" useexternalfile="true" version="${javadoc.version}" windowtitle="${javadoc.windowtitle}">
-            <classpath>
-                <path path="${javac.classpath}"/>
-            </classpath>
-            <fileset dir="${src.dir}" excludes="${excludes}" includes="${includes}">
-                <filename name="**/*.java"/>
-            </fileset>
-            <fileset dir="${build.generated.sources.dir}" erroronmissingdir="false">
-                <include name="**/*.java"/>
-            </fileset>
-        </javadoc>
-        <copy todir="${dist.javadoc.dir}">
-            <fileset dir="${src.dir}" excludes="${excludes}" includes="${includes}">
-                <filename name="**/doc-files/**"/>
-            </fileset>
-            <fileset dir="${build.generated.sources.dir}" erroronmissingdir="false">
-                <include name="**/doc-files/**"/>
-            </fileset>
-        </copy>
-    </target>
-    <target depends="init,-javadoc-build" if="netbeans.home" name="-javadoc-browse" unless="no.javadoc.preview">
-        <nbbrowse file="${dist.javadoc.dir}/index.html"/>
-    </target>
-    <target depends="init,-javadoc-build,-javadoc-browse" description="Build Javadoc." name="javadoc"/>
-    <!--
-                =========================
-                JUNIT COMPILATION SECTION
-                =========================
-            -->
-    <target depends="init,compile" if="have.tests" name="-pre-pre-compile-test">
-        <mkdir dir="${build.test.classes.dir}"/>
-    </target>
-    <target name="-pre-compile-test">
-        <!-- Empty placeholder for easier customization. -->
-        <!-- You can override this target in the ../build.xml file. -->
-    </target>
-    <target if="do.depend.true" name="-compile-test-depend">
-        <j2seproject3:depend classpath="${javac.test.classpath}" destdir="${build.test.classes.dir}" srcdir="${test.src.dir}"/>
-    </target>
-    <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test,-compile-test-depend" if="have.tests" name="-do-compile-test">
-        <j2seproject3:javac apgeneratedsrcdir="${build.test.classes.dir}" classpath="${javac.test.classpath}" debug="true" destdir="${build.test.classes.dir}" processorpath="${javac.test.processorpath}" srcdir="${test.src.dir}"/>
-        <copy todir="${build.test.classes.dir}">
-            <fileset dir="${test.src.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/>
-        </copy>
-    </target>
-    <target name="-post-compile-test">
-        <!-- Empty placeholder for easier customization. -->
-        <!-- You can override this target in the ../build.xml file. -->
-    </target>
-    <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test,-do-compile-test,-post-compile-test" name="compile-test"/>
-    <target name="-pre-compile-test-single">
-        <!-- Empty placeholder for easier customization. -->
-        <!-- You can override this target in the ../build.xml file. -->
-    </target>
-    <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test-single" if="have.tests" name="-do-compile-test-single">
-        <fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>
-        <j2seproject3:force-recompile destdir="${build.test.classes.dir}"/>
-        <j2seproject3:javac apgeneratedsrcdir="${build.test.classes.dir}" classpath="${javac.test.classpath}" debug="true" destdir="${build.test.classes.dir}" excludes="" includes="${javac.includes}" processorpath="${javac.test.processorpath}" sourcepath="${test.src.dir}" srcdir="${test.src.dir}"/>
-        <copy todir="${build.test.classes.dir}">
-            <fileset dir="${test.src.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/>
-        </copy>
-    </target>
-    <target name="-post-compile-test-single">
-        <!-- Empty placeholder for easier customization. -->
-        <!-- You can override this target in the ../build.xml file. -->
-    </target>
-    <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test-single,-do-compile-test-single,-post-compile-test-single" name="compile-test-single"/>
-    <!--
-                =======================
-                JUNIT EXECUTION SECTION
-                =======================
-            -->
-    <target depends="init" if="have.tests" name="-pre-test-run">
-        <mkdir dir="${build.test.results.dir}"/>
-    </target>
-    <target depends="init,compile-test,-pre-test-run" if="have.tests" name="-do-test-run">
-        <j2seproject3:junit testincludes="**/*Test.java"/>
-    </target>
-    <target depends="init,compile-test,-pre-test-run,-do-test-run" if="have.tests" name="-post-test-run">
-        <fail if="tests.failed" unless="ignore.failing.tests">Some tests failed; see details above.</fail>
-    </target>
-    <target depends="init" if="have.tests" name="test-report"/>
-    <target depends="init" if="netbeans.home+have.tests" name="-test-browse"/>
-    <target depends="init,compile-test,-pre-test-run,-do-test-run,test-report,-post-test-run,-test-browse" description="Run unit tests." name="test"/>
-    <target depends="init" if="have.tests" name="-pre-test-run-single">
-        <mkdir dir="${build.test.results.dir}"/>
-    </target>
-    <target depends="init,compile-test-single,-pre-test-run-single" if="have.tests" name="-do-test-run-single">
-        <fail unless="test.includes">Must select some files in the IDE or set test.includes</fail>
-        <j2seproject3:junit excludes="" includes="${test.includes}"/>
-    </target>
-    <target depends="init,compile-test-single,-pre-test-run-single,-do-test-run-single" if="have.tests" name="-post-test-run-single">
-        <fail if="tests.failed" unless="ignore.failing.tests">Some tests failed; see details above.</fail>
-    </target>
-    <target depends="init,compile-test-single,-pre-test-run-single,-do-test-run-single,-post-test-run-single" description="Run single unit test." name="test-single"/>
-    <!--
-                =======================
-                JUNIT DEBUGGING SECTION
-                =======================
-            -->
-    <target depends="init,compile-test" if="have.tests" name="-debug-start-debuggee-test">
-        <fail unless="test.class">Must select one file in the IDE or set test.class</fail>
-        <property location="${build.test.results.dir}/TEST-${test.class}.xml" name="test.report.file"/>
-        <delete file="${test.report.file}"/>
-        <mkdir dir="${build.test.results.dir}"/>
-        <j2seproject3:debug classname="org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner" classpath="${ant.home}/lib/ant.jar:${ant.home}/lib/ant-junit.jar:${debug.test.classpath}">
-            <customize>
-                <syspropertyset>
-                    <propertyref prefix="test-sys-prop."/>
-                    <mapper from="test-sys-prop.*" to="*" type="glob"/>
-                </syspropertyset>
-                <arg value="${test.class}"/>
-                <arg value="showoutput=true"/>
-                <arg value="formatter=org.apache.tools.ant.taskdefs.optional.junit.BriefJUnitResultFormatter"/>
-                <arg value="formatter=org.apache.tools.ant.taskdefs.optional.junit.XMLJUnitResultFormatter,${test.report.file}"/>
-            </customize>
-        </j2seproject3:debug>
-    </target>
-    <target depends="init,compile-test" if="netbeans.home+have.tests" name="-debug-start-debugger-test">
-        <j2seproject1:nbjpdastart classpath="${debug.test.classpath}" name="${test.class}"/>
-    </target>
-    <target depends="init,compile-test-single,-debug-start-debugger-test,-debug-start-debuggee-test" name="debug-test"/>
-    <target depends="init,-pre-debug-fix,compile-test-single" if="netbeans.home" name="-do-debug-fix-test">
-        <j2seproject1:nbjpdareload dir="${build.test.classes.dir}"/>
-    </target>
-    <target depends="init,-pre-debug-fix,-do-debug-fix-test" if="netbeans.home" name="debug-fix-test"/>
-    <!--
-                =========================
-                APPLET EXECUTION SECTION
-                =========================
-            -->
-    <target depends="init,compile-single" name="run-applet">
-        <fail unless="applet.url">Must select one file in the IDE or set applet.url</fail>
-        <j2seproject1:java classname="sun.applet.AppletViewer">
-            <customize>
-                <arg value="${applet.url}"/>
-            </customize>
-        </j2seproject1:java>
-    </target>
-    <!--
-                =========================
-                APPLET DEBUGGING  SECTION
-                =========================
-            -->
-    <target depends="init,compile-single" if="netbeans.home" name="-debug-start-debuggee-applet">
-        <fail unless="applet.url">Must select one file in the IDE or set applet.url</fail>
-        <j2seproject3:debug classname="sun.applet.AppletViewer">
-            <customize>
-                <arg value="${applet.url}"/>
-            </customize>
-        </j2seproject3:debug>
-    </target>
-    <target depends="init,compile-single,-debug-start-debugger,-debug-start-debuggee-applet" if="netbeans.home" name="debug-applet"/>
-    <!--
-                ===============
-                CLEANUP SECTION
-                ===============
-            -->
-    <target name="-deps-clean-init" unless="built-clean.properties">
-        <property location="${build.dir}/built-clean.properties" name="built-clean.properties"/>
-        <delete file="${built-clean.properties}" quiet="true"/>
-    </target>
-    <target if="already.built.clean.${basedir}" name="-warn-already-built-clean">
-        <echo level="warn" message="Cycle detected: WorldEdit was already built"/>
-    </target>
-    <target depends="init,-deps-clean-init" name="deps-clean" unless="no.deps">
-        <mkdir dir="${build.dir}"/>
-        <touch file="${built-clean.properties}" verbose="false"/>
-        <property file="${built-clean.properties}" prefix="already.built.clean."/>
-        <antcall target="-warn-already-built-clean"/>
-        <propertyfile file="${built-clean.properties}">
-            <entry key="${basedir}" value=""/>
-        </propertyfile>
-    </target>
-    <target depends="init" name="-do-clean">
-        <delete dir="${build.dir}"/>
-        <delete dir="${dist.dir}" followsymlinks="false" includeemptydirs="true"/>
-    </target>
-    <target name="-post-clean">
-        <!-- Empty placeholder for easier customization. -->
-        <!-- You can override this target in the ../build.xml file. -->
-    </target>
-    <target depends="init,deps-clean,-do-clean,-post-clean" description="Clean build products." name="clean"/>
-    <target name="-check-call-dep">
-        <property file="${call.built.properties}" prefix="already.built."/>
-        <condition property="should.call.dep">
-            <not>
-                <isset property="already.built.${call.subproject}"/>
-            </not>
-        </condition>
-    </target>
-    <target depends="-check-call-dep" if="should.call.dep" name="-maybe-call-dep">
-        <ant antfile="${call.script}" inheritall="false" target="${call.target}">
-            <propertyset>
-                <propertyref prefix="transfer."/>
-                <mapper from="transfer.*" to="*" type="glob"/>
-            </propertyset>
-        </ant>
-    </target>
-</project>
diff --git a/nbproject/genfiles.properties b/nbproject/genfiles.properties
deleted file mode 100644
index 04f9e76e8..000000000
--- a/nbproject/genfiles.properties
+++ /dev/null
@@ -1,8 +0,0 @@
-build.xml.data.CRC32=42cf9516
-build.xml.script.CRC32=69084283
-build.xml.stylesheet.CRC32=28e38971@1.38.2.45
-# This file is used by a NetBeans-based IDE to track changes in generated files such as build-impl.xml.
-# Do not edit this file. You may delete it but then the IDE will never regenerate such files for you.
-nbproject/build-impl.xml.data.CRC32=42cf9516
-nbproject/build-impl.xml.script.CRC32=41daa5fe
-nbproject/build-impl.xml.stylesheet.CRC32=f33e10ff@1.38.2.45
diff --git a/nbproject/project.properties b/nbproject/project.properties
deleted file mode 100644
index a68e37a09..000000000
--- a/nbproject/project.properties
+++ /dev/null
@@ -1,64 +0,0 @@
-build.classes.dir=${build.dir}/classes
-build.classes.excludes=**/*.java,**/*.form
-# This directory is removed when the project is cleaned:
-build.dir=build
-build.generated.dir=${build.dir}/generated
-build.generated.sources.dir=${build.dir}/generated-sources
-# Only compile against the classpath explicitly listed here:
-build.sysclasspath=ignore
-build.test.classes.dir=${build.dir}/test/classes
-build.test.results.dir=${build.dir}/test/results
-# Uncomment to specify the preferred debugger connection transport:
-#debug.transport=dt_socket
-debug.classpath=\
-    ${run.classpath}
-debug.test.classpath=\
-    ${run.test.classpath}
-# This directory is removed when the project is cleaned:
-dist.dir=dist
-dist.jar=${dist.dir}/WorldEdit.jar
-dist.javadoc.dir=${dist.dir}/javadoc
-excludes=
-file.reference.minecraft_server.jar=lib\\minecraft_server.jar
-includes=**
-jar.compress=false
-javac.classpath=\
-    ${file.reference.minecraft_server.jar}:\
-    ${libs.Minecraft_Mod.classpath}
-# Space-separated list of extra javac options
-javac.compilerargs=
-javac.deprecation=false
-javac.source=1.5
-javac.target=1.5
-javac.test.classpath=\
-    ${javac.classpath}:\
-    ${build.classes.dir}:\
-    ${libs.junit.classpath}:\
-    ${libs.junit_4.classpath}
-javadoc.additionalparam=
-javadoc.author=false
-javadoc.encoding=${source.encoding}
-javadoc.noindex=false
-javadoc.nonavbar=false
-javadoc.notree=false
-javadoc.private=false
-javadoc.splitindex=true
-javadoc.use=true
-javadoc.version=false
-javadoc.windowtitle=
-jaxbwiz.endorsed.dirs="${netbeans.home}/../ide12/modules/ext/jaxb/api"
-meta.inf.dir=${src.dir}/META-INF
-platform.active=default_platform
-run.classpath=\
-    ${javac.classpath}:\
-    ${build.classes.dir}
-# Space-separated list of JVM arguments used when running the project
-# (you may also define separate properties like run-sys-prop.name=value instead of -Dname=value
-# or test-sys-prop.name=value to set system properties for unit tests):
-run.jvmargs=
-run.test.classpath=\
-    ${javac.test.classpath}:\
-    ${build.test.classes.dir}
-source.encoding=UTF-8
-src.dir=src
-test.src.dir=test
diff --git a/nbproject/project.xml b/nbproject/project.xml
deleted file mode 100644
index 523413b11..000000000
--- a/nbproject/project.xml
+++ /dev/null
@@ -1,15 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<project xmlns="http://www.netbeans.org/ns/project/1">
-    <type>org.netbeans.modules.java.j2seproject</type>
-    <configuration>
-        <data xmlns="http://www.netbeans.org/ns/j2se-project/3">
-            <name>WorldEdit</name>
-            <source-roots>
-                <root id="src.dir"/>
-            </source-roots>
-            <test-roots>
-                <root id="test.src.dir"/>
-            </test-roots>
-        </data>
-    </configuration>
-</project>